- JST cable x1
- Aluminum top and bottom case x1
- Rubber feet x1 set
- Screwdriver with T8 bit x1
- PH0 Phillips screwdriver bit x1
- Silicone Bumpers x 1 set
- Screws x1 set
- Screw standoff x1 set
- Carrying case x1
- Dual Silicone diffuser
- Hotswap PCB x1
- USB Cable x1
- Cherry stabilizers x1 set
- PCB foam x1
- Optional plate x1
- PBTfans Crosshair base kit x1 set (PT49-1)
🎉 Up to 70% Off Selected ItemsShop Sale
\n
Include
- JST cable x1
- Aluminum top and bottom case x1
- Rubber feet x1 set
- Screwdriver with T8 bit x1
- PH0 Phillips screwdriver bit x1
- Silicone Bumpers x 1 set
- Screws x1 set
- Screw standoff x1 set
- Carrying case x1
- Dual Silicone diffuser
- Hotswap PCB x1
- USB Cable x1
- Cherry stabilizers x1 set
- PCB foam x1
- Optional plate x1
- PBTfans Crosshair base kit x1 set (PT49-1)
Halo Bottom cover
- material: PC
- Process: CNC
- Description: There are two styles available: an internal bottom cover and a full-bottom plate. The full-bottom version replaces the bottom case and is made entirely of PC material for more consistent light translucency.
- Friendly Tip: For a better effect, you can purchase this with the tape mod available in our store to create custom patterns!
- Estimated to ship before September 10, 2025.
\n
Plate file
- Holy80 ANSI plate
About Tape Mod information
- Cut your image online
- Image must have at least 2073 px width and 749 px height
- \nFriendly Reminder: There are cut-off points on the customized tape mod.
-Cut-off points for top and bottom is 2 mm
-Cut-off points for left and right is 4 mm
Make sure the picture you select will not be affected by the cut-off points.\n -
If you upload the image, you agree that the image being uploaded does NOT contain the following:
Excessively gory images
Graphic violence images
Adult content
Gratuitous gore
Hateful imagery
Political or confrontational imagery
Images that do not comply with laws and regulations prevailing in the People's Republic of China (and any prevailing regional laws in the states that KBDfans operates in)
Failure to comply with the guidelines specified will result in your customized request not being fulfilled. A refund will not be provided and you will instead receive a blank tape mod.
PCB
You can set the PCB in tofix.cc
1.6mm Thickness/ FR4 Material/ Polling Rate: 8kHz/ Scan Rate: 18kHz/ Theoretical Latency: 0.125ms
\n ![](\"https://i.shgcdn.com/e3701689-74c6-4cea-9660-d8b012f3f21c/-/format/auto/-/quality/best/\")
\n ![](\"https://i.shgcdn.com/60e478d0-5601-4e0f-a0cf-3c9a1f8d2d76/-/format/auto/-/quality/best/\")
ANSI Plate
\n
\n ![](\"https://i.shgcdn.com/1bcf240f-fcda-4b6e-8cd2-6ef8b2a058fb/-/format/auto/-/quality/best/\")
ANSI PC plate
\n
\n ![](\"https://i.shgcdn.com/6708a3ce-283d-400f-886c-20c765de4c64/-/format/auto/-/quality/best/\")
ANSI Alu plate
\n
\n ![](\"https://i.shgcdn.com/ca335d20-b4a2-45b6-8584-033c08302357/-/format/auto/-/quality/best/\")
ANSI Carbon Fiber plate
\n ![](\"https://i.shgcdn.com/731bf977-b1d2-4b9d-bee7-b9ac147b8bb8/-/format/auto/-/quality/best/\")
\n ![](\"https://i.shgcdn.com/0906d50a-0e79-46e8-8c44-32d90f70f3a2/-/format/auto/-/quality/normal/\")
\n ![](\"https://i.shgcdn.com/abe037cf-a90e-4c6d-a6b1-2caf26aee8c9/-/format/auto/-/quality/best/\")
layout Support
Pictures
Dimension
\n
\n ![](\"https://i.shgcdn.com/e2f127fc-0ad8-4b9d-bef6-1430be43b8df/-/format/auto/-/quality/normal/\")
![](\"https://i.shgcdn.com/914f9247-19d9-4fc3-86e8-981ed1163163/-/format/auto/-/quality/best/\")
![](\"https://i.shgcdn.com/e8fd3df6-8e3d-4279-9894-d258b99eec61/-/format/auto/-/quality/best/\")
![](\"https://i.shgcdn.com/2617ea28-ba5e-4f68-945d-d3666c4fe605/-/format/auto/-/quality/best/\")
![](\"https://i.shgcdn.com/71ceadaf-3231-4c17-8746-303f2d3f3647/-/format/auto/-/quality/best/\")
![](\"https://i.shgcdn.com/9b9d3ca5-3902-4c7c-9ff6-37c5338efea0/-/format/auto/-/quality/best/\")
![](\"https://i.shgcdn.com/f10e28aa-2d2f-48b8-922a-e5b6e42bb1c7/-/format/auto/-/quality/best/\")
![](\"https://i.shgcdn.com/1dd84a5c-2bc7-422a-9af1-1c242d650934/-/format/auto/-/quality/best/\")
![](\"https://i.shgcdn.com/31516f50-215a-499c-9036-f9767a5b8925/-/format/auto/-/quality/best/\")
\n
Include
- JST cable x1
- Aluminum top and bottom case x1
- Rubber feet x1 set
- Screwdriver with T8 bit x1
- PH0 Phillips screwdriver bit x1
- Silicone Bumpers x 1 set
- Screws x1 set
- Screw standoff x1 set
- Carrying case x1
- Dual Silicone diffuser
- Hotswap PCB x1
- USB Cable x1
- Cherry stabilizers x1 set
- PCB foam x1
- Optional plate x1
- PBTfans Crosshair base kit x1 set (PT49-1)
Halo Bottom cover
- material: PC
- Process: CNC
- Description: There are two styles available: an internal bottom cover and a full-bottom plate. The full-bottom version replaces the bottom case and is made entirely of PC material for more consistent light translucency.
- Friendly Tip: For a better effect, you can purchase this with the tape mod available in our store to create custom patterns!
- Estimated to ship before September 10, 2025.
\n
Plate file
- Holy80 ANSI plate
About Tape Mod information
- Cut your image online
- Image must have at least 2073 px width and 749 px height
- \nFriendly Reminder: There are cut-off points on the customized tape mod.
-Cut-off points for top and bottom is 2 mm
-Cut-off points for left and right is 4 mm
Make sure the picture you select will not be affected by the cut-off points.\n -
If you upload the image, you agree that the image being uploaded does NOT contain the following:
Excessively gory images
Graphic violence images
Adult content
Gratuitous gore
Hateful imagery
Political or confrontational imagery
Images that do not comply with laws and regulations prevailing in the People's Republic of China (and any prevailing regional laws in the states that KBDfans operates in)
Failure to comply with the guidelines specified will result in your customized request not being fulfilled. A refund will not be provided and you will instead receive a blank tape mod.
PCB
You can set the PCB in tofix.cc
1.6mm Thickness/ FR4 Material/ Polling Rate: 8kHz/ Scan Rate: 18kHz/ Theoretical Latency: 0.125ms
\n
\n
ANSI Plate
\n
\n
ANSI PC plate
\n
\n
ANSI Alu plate
\n
\n
ANSI Carbon Fiber plate
\n
\n
\n
layout Support
Pictures
Dimension
Ready To Use Holy80 Hotswap version with PBDfans Crosshair
Include
Halo Bottom cover
- material: PC
- Process: CNC
- Description: There are two styles available: an internal bottom cover and a full-bottom plate. The full-bottom version replaces the bottom case and is made entirely of PC material for more consistent light translucency.
- Friendly Tip: For a better effect, you can purchase this with the tape mod available in our store to create custom patterns!
- Estimated to ship before September 10, 2025.
Plate file
- Holy80 ANSI plate
About Tape Mod information
- Cut your image online
- Image must have at least 2073 px width and 749 px height
-
Friendly Reminder: There are cut-off points on the customized tape mod.
-Cut-off points for top and bottom is 2 mm
-Cut-off points for left and right is 4 mm
Make sure the picture you select will not be affected by the cut-off points. -
If you upload the image, you agree that the image being uploaded does NOT contain the following:
Excessively gory images
Graphic violence images
Adult content
Gratuitous gore
Hateful imagery
Political or confrontational imagery
Images that do not comply with laws and regulations prevailing in the People's Republic of China (and any prevailing regional laws in the states that KBDfans operates in)
Failure to comply with the guidelines specified will result in your customized request not being fulfilled. A refund will not be provided and you will instead receive a blank tape mod.
PCB
You can set the PCB in tofix.cc
1.6mm Thickness/ FR4 Material/ Polling Rate: 8kHz/ Scan Rate: 18kHz/ Theoretical Latency: 0.125ms
ANSI Plate
ANSI PC plate
ANSI Alu plate
ANSI Carbon Fiber plate
layout Support
Pictures
Dimension
Include
- JST cable x1
- Aluminum top and bottom case x1
- Rubber feet x1 set
- Screwdriver with T8 bit x1
- PH0 Phillips screwdriver bit x1
- Silicone Bumpers x 1 set
- Screws x1 set
- Screw standoff x1 set
- Carrying case x1
- Dual Silicone diffuser
- Hotswap PCB x1
- USB Cable x1
- Cherry stabilizers x1 set
- PCB foam x1
- Optional plate x1
- PBTfans Crosshair base kit x1 set (PT49-1)
Halo Bottom cover
- material: PC
- Process: CNC
- Description: There are two styles available: an internal bottom cover and a full-bottom plate. The full-bottom version replaces the bottom case and is made entirely of PC material for more consistent light translucency.
- Friendly Tip: For a better effect, you can purchase this with the tape mod available in our store to create custom patterns!
- Estimated to ship before September 10, 2025.
Plate file
- Holy80 ANSI plate
About Tape Mod information
- Cut your image online
- Image must have at least 2073 px width and 749 px height
-
Friendly Reminder: There are cut-off points on the customized tape mod.
-Cut-off points for top and bottom is 2 mm
-Cut-off points for left and right is 4 mm
Make sure the picture you select will not be affected by the cut-off points. -
If you upload the image, you agree that the image being uploaded does NOT contain the following:
Excessively gory images
Graphic violence images
Adult content
Gratuitous gore
Hateful imagery
Political or confrontational imagery
Images that do not comply with laws and regulations prevailing in the People's Republic of China (and any prevailing regional laws in the states that KBDfans operates in)
Failure to comply with the guidelines specified will result in your customized request not being fulfilled. A refund will not be provided and you will instead receive a blank tape mod.
PCB
You can set the PCB in tofix.cc
1.6mm Thickness/ FR4 Material/ Polling Rate: 8kHz/ Scan Rate: 18kHz/ Theoretical Latency: 0.125ms
ANSI Plate
ANSI PC plate
ANSI Alu plate
ANSI Carbon Fiber plate
layout Support
Pictures
Dimension
Select Case color
Select Plate material
From $84.30
Original: $281.00
-70%Ready To Use Holy80 Hotswap version with PBDfans Crosshair—
$281.00
$84.30More Images
Ready To Use Holy80 Hotswap version with PBDfans Crosshair
Include
- JST cable x1
- Aluminum top and bottom case x1
- Rubber feet x1 set
- Screwdriver with T8 bit x1
- PH0 Phillips screwdriver bit x1
- Silicone Bumpers x 1 set
- Screws x1 set
- Screw standoff x1 set
- Carrying case x1
- Dual Silicone diffuser
- Hotswap PCB x1
- USB Cable x1
- Cherry stabilizers x1 set
- PCB foam x1
- Optional plate x1
- PBTfans Crosshair base kit x1 set (PT49-1)
Halo Bottom cover
- material: PC
- Process: CNC
- Description: There are two styles available: an internal bottom cover and a full-bottom plate. The full-bottom version replaces the bottom case and is made entirely of PC material for more consistent light translucency.
- Friendly Tip: For a better effect, you can purchase this with the tape mod available in our store to create custom patterns!
- Estimated to ship before September 10, 2025.
Plate file
- Holy80 ANSI plate
About Tape Mod information
- Cut your image online
- Image must have at least 2073 px width and 749 px height
-
Friendly Reminder: There are cut-off points on the customized tape mod.
-Cut-off points for top and bottom is 2 mm
-Cut-off points for left and right is 4 mm
Make sure the picture you select will not be affected by the cut-off points. -
If you upload the image, you agree that the image being uploaded does NOT contain the following:
Excessively gory images
Graphic violence images
Adult content
Gratuitous gore
Hateful imagery
Political or confrontational imagery
Images that do not comply with laws and regulations prevailing in the People's Republic of China (and any prevailing regional laws in the states that KBDfans operates in)
Failure to comply with the guidelines specified will result in your customized request not being fulfilled. A refund will not be provided and you will instead receive a blank tape mod.
PCB
You can set the PCB in tofix.cc
1.6mm Thickness/ FR4 Material/ Polling Rate: 8kHz/ Scan Rate: 18kHz/ Theoretical Latency: 0.125ms
ANSI Plate
ANSI PC plate
ANSI Alu plate
ANSI Carbon Fiber plate
layout Support
Pictures
Dimension
Include
- JST cable x1
- Aluminum top and bottom case x1
- Rubber feet x1 set
- Screwdriver with T8 bit x1
- PH0 Phillips screwdriver bit x1
- Silicone Bumpers x 1 set
- Screws x1 set
- Screw standoff x1 set
- Carrying case x1
- Dual Silicone diffuser
- Hotswap PCB x1
- USB Cable x1
- Cherry stabilizers x1 set
- PCB foam x1
- Optional plate x1
- PBTfans Crosshair base kit x1 set (PT49-1)
Halo Bottom cover
- material: PC
- Process: CNC
- Description: There are two styles available: an internal bottom cover and a full-bottom plate. The full-bottom version replaces the bottom case and is made entirely of PC material for more consistent light translucency.
- Friendly Tip: For a better effect, you can purchase this with the tape mod available in our store to create custom patterns!
- Estimated to ship before September 10, 2025.
Plate file
- Holy80 ANSI plate
About Tape Mod information
- Cut your image online
- Image must have at least 2073 px width and 749 px height
-
Friendly Reminder: There are cut-off points on the customized tape mod.
-Cut-off points for top and bottom is 2 mm
-Cut-off points for left and right is 4 mm
Make sure the picture you select will not be affected by the cut-off points. -
If you upload the image, you agree that the image being uploaded does NOT contain the following:
Excessively gory images
Graphic violence images
Adult content
Gratuitous gore
Hateful imagery
Political or confrontational imagery
Images that do not comply with laws and regulations prevailing in the People's Republic of China (and any prevailing regional laws in the states that KBDfans operates in)
Failure to comply with the guidelines specified will result in your customized request not being fulfilled. A refund will not be provided and you will instead receive a blank tape mod.
PCB
You can set the PCB in tofix.cc
1.6mm Thickness/ FR4 Material/ Polling Rate: 8kHz/ Scan Rate: 18kHz/ Theoretical Latency: 0.125ms
ANSI Plate
ANSI PC plate
ANSI Alu plate
ANSI Carbon Fiber plate
layout Support
Pictures
Dimension
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Include
- JST cable x1
- Aluminum top and bottom case x1
- Rubber feet x1 set
- Screwdriver with T8 bit x1
- PH0 Phillips screwdriver bit x1
- Silicone Bumpers x 1 set
- Screws x1 set
- Screw standoff x1 set
- Carrying case x1
- Dual Silicone diffuser
- Hotswap PCB x1
- USB Cable x1
- Cherry stabilizers x1 set
- PCB foam x1
- Optional plate x1
- PBTfans Crosshair base kit x1 set (PT49-1)
Halo Bottom cover
- material: PC
- Process: CNC
- Description: There are two styles available: an internal bottom cover and a full-bottom plate. The full-bottom version replaces the bottom case and is made entirely of PC material for more consistent light translucency.
- Friendly Tip: For a better effect, you can purchase this with the tape mod available in our store to create custom patterns!
- Estimated to ship before September 10, 2025.
Plate file
- Holy80 ANSI plate
About Tape Mod information
- Cut your image online
- Image must have at least 2073 px width and 749 px height
-
Friendly Reminder: There are cut-off points on the customized tape mod.
-Cut-off points for top and bottom is 2 mm
-Cut-off points for left and right is 4 mm
Make sure the picture you select will not be affected by the cut-off points. -
If you upload the image, you agree that the image being uploaded does NOT contain the following:
Excessively gory images
Graphic violence images
Adult content
Gratuitous gore
Hateful imagery
Political or confrontational imagery
Images that do not comply with laws and regulations prevailing in the People's Republic of China (and any prevailing regional laws in the states that KBDfans operates in)
Failure to comply with the guidelines specified will result in your customized request not being fulfilled. A refund will not be provided and you will instead receive a blank tape mod.
PCB
You can set the PCB in tofix.cc
1.6mm Thickness/ FR4 Material/ Polling Rate: 8kHz/ Scan Rate: 18kHz/ Theoretical Latency: 0.125ms
ANSI Plate
ANSI PC plate
ANSI Alu plate
ANSI Carbon Fiber plate
layout Support
Pictures
Dimension
Include
- JST cable x1
- Aluminum top and bottom case x1
- Rubber feet x1 set
- Screwdriver with T8 bit x1
- PH0 Phillips screwdriver bit x1
- Silicone Bumpers x 1 set
- Screws x1 set
- Screw standoff x1 set
- Carrying case x1
- Dual Silicone diffuser
- Hotswap PCB x1
- USB Cable x1
- Cherry stabilizers x1 set
- PCB foam x1
- Optional plate x1
- PBTfans Crosshair base kit x1 set (PT49-1)
Halo Bottom cover
- material: PC
- Process: CNC
- Description: There are two styles available: an internal bottom cover and a full-bottom plate. The full-bottom version replaces the bottom case and is made entirely of PC material for more consistent light translucency.
- Friendly Tip: For a better effect, you can purchase this with the tape mod available in our store to create custom patterns!
- Estimated to ship before September 10, 2025.
Plate file
- Holy80 ANSI plate
About Tape Mod information
- Cut your image online
- Image must have at least 2073 px width and 749 px height
-
Friendly Reminder: There are cut-off points on the customized tape mod.
-Cut-off points for top and bottom is 2 mm
-Cut-off points for left and right is 4 mm
Make sure the picture you select will not be affected by the cut-off points. -
If you upload the image, you agree that the image being uploaded does NOT contain the following:
Excessively gory images
Graphic violence images
Adult content
Gratuitous gore
Hateful imagery
Political or confrontational imagery
Images that do not comply with laws and regulations prevailing in the People's Republic of China (and any prevailing regional laws in the states that KBDfans operates in)
Failure to comply with the guidelines specified will result in your customized request not being fulfilled. A refund will not be provided and you will instead receive a blank tape mod.
PCB
You can set the PCB in tofix.cc
1.6mm Thickness/ FR4 Material/ Polling Rate: 8kHz/ Scan Rate: 18kHz/ Theoretical Latency: 0.125ms
ANSI Plate
ANSI PC plate
ANSI Alu plate
ANSI Carbon Fiber plate
layout Support
Pictures
Dimension
